Basic Features; Installing The Ip Phone And Connecting To The Network; Adjusting The Height Of The Footstand; Placing A Call - Cisco 7941 Quick Start Manual

Basic Features

Installing the IP Phone and Connecting to the Network

Step 1) Connect an Ethernet cable to the Network port (middle port) on the phone. The other end of
the Ethernet cable must be plugged into a powered Ethernet jack. All VoIP-capable Ethernet
jacks are marked with a red dot.
Step 2) Connect the handset and headset (if applicable) to their respective ports.
Step 3) Connect the Ethernet cable from your Desktop PC to the Access Port on the IP Phone
(optional).
Step 4) Connect the power plug to the DC48V AC Adapter port (optional).
Note: Before successfully installing the phone, the system administrator must prepare the network for
the phone.

Adjusting the Height of the Footstand

1. Push the footstand adjustment knob on the right-hand side of the phone.
2. With the button depressed, adjust the footstand to the desired height.
3. Depress the footstand adjustment knob.

Placing a Call

There are seven options for placing a new call.
Lift the handset and dial the number.
Press a line button and dial the number.
Press the SPEAKER button and dial the number.
Press the HEADSET button and dial the number.
Press the NewCall soft key and dial the number.
Press a pre-configured Speed Dial line button.
Press a two-digit Speed Dial index code and press the AbbrDial soft key.
Internal Extension:
Dial the 4-digit extension
External Local Call:
Dial 3 + the entire 7-digit phone number
Long Distance:
Dial 3 + 1 the entire 10-digit phone number (area code + number)
Notes: After you press the 3 (for an outside line) you will hear a dial tone again to let you know you are
accessing an external line.
Pick up the handset. If you do not hear a dial tone, press an available line button to begin making
the call.
Press the SPEAKER button. If you do not hear a dial tone, press an available line button to begin
to make the call or press the NewCall soft key. If you do not hear a dial tone, press an available
line button to begin to make the call (the call will dial with the speakerphone on).
MISSOURI S&T Information Technology Quick Start Guide: Cisco 7941/7961 IP Telephone – 5