Using Star Codes - Cisco SPA525G User Manual

Using Advanced Phone Features

Using Star Codes

Using Star Codes
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
The Cisco SPA525G and Cisco SPA525G2 supports star codes. These codes
start with and asterisk (*) and access supplementary services. For example, to
block your caller ID for a specific call, dial *67 followed by the telephone number
you are calling.
The table lists supported star codes. Some codes must be configured by your
phone administrator and might not be available on all systems.
Code Definition
03 Request media loopback for a call to monitor Voice over IP quality.
16 Activate Secure Call for all calls. See
17 Deactivate Secure Call for all calls. See
18 Activate Secure Call for a single call. See
19 Deactivate Secure Call for a single call. See
page
36 Pick up a call at another extension. See
37 Pick up a call from a group. See
38 Park a call. See
39 Unpark a call. See
66 Activate Call Back.
until the called party phone rings.
69 Call the most recent number that called your phone.
72 Activate Call Forward All. See
73 Deactivate Call Forward All. See
77 Activate anonymous call blocking. See
page
86 Deactivate Call Back.
57.
Parking a Call, page
Parking a Call, page
Causes the IP phone to redial a busy number
56.
Using Secure Call, page
Using Secure Call, page
Using Secure Call, page
Using Secure Call,
Picking Up a Call, page
Picking Up a Call, page
45.
45.
Forwarding Calls, page
Forwarding Calls, page
Blocking Anonymous Calls,
4
57.
57.
57.
44.
44.
41.
41.
77