Using Wi-Fi Protected Setup - Cisco SPA525G User Manual

Installing Your Phone
Connecting Your Phone to the Network
STEP 7
STEP 1
STEP 2
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Choose one of the following options:
• Wireless Profile—Use this option to add a new wireless profile (either
manually or by scanning for available networks), editing an existing wireless
profile, or connecting to a previously configured network. See
Adding a Wireless Profile, page
• Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected
Setup, use this method to set up your wireless connection. See
Protected Setup, page

Using Wi-Fi Protected Setup

If your router has a WPS button, you can use Wi-Fi Protected
Setup to add a new wireless network profile.
Select Wireless Configuration and select Wi-Fi Protected Setup.
Choose one of the following options:
Push Button Configuration:
a. Press the WPS button on your router.
b. On your phone, highlight Push Button Configuration and press Select. Your
phone might reboot before the Wi-Fi connection is established.
PIN Configuration
a. After selecting PIN Configuration on your phone, note the PIN displayed.
b. Connect to your router interface by using a PC by following the instructions
provided with your router.
c. If required, enter the user name and password. (By default, Linksys routers
typically use admin for the user name and admin for the password. Cisco
routers typically use cisco for the username and cisco for the password.)
d. Locate the Wireless Protected Setup configuration menu.
e. Enter the PIN into the field that allows you to setup wireless devices by using a
PIN.
31.
30.
2
Manually
Using Wi-Fi
30