4.2.3. MAIN Screen set
and control
4.2.3.1. COMM SET
00HAA0001203 (Rev 1.0)
COMM SET
Press
KEY for 6 seconds to move to MAIN MENU 2.
Switch to the COMM SET setting screen.
ADDRESS SET
ADDR : Input ADDRESS(1 ~ 99)
Maximum 9units can be controlled with RS-485 interface by PC.
Set protocol as PCLK1.
.
AT TUNING
Press
KEY for 6 seconds to move to MAIN MENU 2.
Switch to the AT TUNING setting screen.
It can be set and performed FIX RUN mode ONLY.
TUNING : Accordng to AT ZONE setting, performs TUNING and save at PID
GROUP automatically depending on setting number.
AT ZONE : When ZONE à AT doing, ZONE PID AUTO TUNING operating.
When SEG à AT doing, SEG PID AUTO TUNING operating.
.