Jeio tech TC-ME-025 Operating Manual page 19

1.6.2 Operator responsibility
The operator's responsibility does not end with efficient experimentation and production. The operator
usually has the most daily contact with the equipment and intimately knows its capabilities and limitations.
Plant and personnel safety is sometimes forgotten in the desire to meet incentive rates, or through a
casual attitude toward laboratory equipment formed over a period of months or years. Your employer
probably has established a set of safety rules in your workplace. Those rules, this manual, or any other
safety information will not keep you from being injured while operating your equipment.
Learn and always use safe operation. Cooperate with co-workers to promote safe practices. Immediately
report any potentially dangerous situation to your supervisor or appropriate person.
REMEMBER:
NEVER place your hands or any part of your body in any dangerous location.
NEVER operate, service, or adjust the equipment without appropriate training and first reading and
understanding this manual.
Before you start the portable drying/conveying system check the following:
Remove all tools from the machine.
Be sure no objects, samples or chemicals are laying on the chamber.
If your chamber has been inoperative or unattended, check all settings before starting the unit.
At the beginning of your shift and after breaks, verify that the chamber is functioning properly.
Report the following occurrences IMMEDIATELY:
unsafe operation or condition
unusual incubated shaker action
leakage
improper maintenance
DO NOT wear loose clothing or jewelry, which can be caught while working on the equipment. In addition,
cover or tie back long hair.
Clean the equipment and surrounding area DAILY, and inspect the machine for loose, missing or broken
parts.
Shut off power to the chamber when it is not in use. Turn the power switch to the OFF position, or unplug it
from the power source.
00HAA0001203 (Rev 1.0)