Phase 2: Removing The Unit From Wooden Crate - Jeio tech TC-ME-025 Operating Manual

3.1.2.2 Phase 2: Removing the unit from wooden crate

Temperature chamber is shipped with the caster feet in the locked position.
Additionally, blocking is used to lock the casters and the unit in place. Use the following procedure to remove
the unit from the wooden crate using a forklift.
Do not use manpower in any cases because it's heavy for men to lift
forklift
Tool required
None
Figure 3.7
Step 1: Carefully slide forklift forks under the unit. Forks should be set so that outside to outside fork dimension is
800mm. See Figure 3.7.
Step 2: Slowly lift the unit above the caster blocking and carefully pull the unit out of the crate.
Step 3: Set the unit on the floor so it rests on the caster feet.