Table of Contents
Advertisement
3.4 Locking/Unlocking Casters & Leveling the unit
The caster assembly allows for easy movement, locking and leveling of the unit. For proper agitation, it
requires the unit to be level side to side and front to back. Use the following instructions to ensure the unit
is level.
Tool required
Step 1: Place the unit in its location.
Step 2: Lower the foot of each caster
by turning the red height adjustment
counterclockwise until it hits the floor.
Turn the height adjustment a quarter turn
or more to ensure the unit's weight is taken off
the caster. This will lock the unit in place.
Step 3: Place a level on the top of the door
and check for level side-to-side and front-to-back.
Step 4: Turn the height adjustment to rise
or lower the unit until is fixed.
00HAA0001203 (Rev 1.0)
Figure 3.12
Advertisement
Table of Contents
