Unit Other Components - Jeio tech TC-ME-025 Operating Manual

2.3.1. Unit other components

00HAA0001203 (Rev 1.0)
Evaporator
The existing evaporators use the aluminum pins, so it
has worry for corrosion and thermal efficiency
decreasing. However, our product is removed the
corrosion problem and progressed the refrigeration
ability by using the evaporator that uses the copper
pins.
Heater
The sheath type heating element for temperature is
used in the established equipment in which takes lots
of load to control the operation because it cause a
residual heat when heating and cooling, and lots of a
time for the auto tuning. However, the Nichrome(Ni-Cr)
heating element newly adopted has been improved in
the response speed resulting in better performance in
controlling the temperature and reducing the time for
auto tuning. And also the heating element for
humidity is made of SUS material not to cause some
problem in quality for the long time running..
Access port
- Basic access port is Ø50mm, and each Ø50mm or
Ø80mm Access port can be added upon user's
request.
-Access port is used for the passing the power cable
Thru chamber for the sample test of electronic
components or other
Devices