Jeio tech TC-ME-025 Operating Manual page 10

1.1 How to use the Manual
1.1.1 Introduction
This manual is intended for individuals requiring information about the use Temperature chamber. Use this
manual as a guide and reference for installing, operating, and maintaining your Jeio Tech Temperature
chamber. The purpose is to assist you in applying efficient, proven techniques that enhance equipment
productivity
This manual covers only light corrective maintenance. No installation, service procedure or other
maintenance should be undertaken without first contacting a service technician, nor should be carried out
by someone other than a service technician with specific experience with laboratory equipment and
electricity.
1.1.2 Chapter summary
The Functional Description chapter outlines models covered, standard features, and safety features.
Additional sections within the manual provide instructions for installation, pre-operational procedures,
operation, preventive maintenance, and corrective maintenance.
The Installation chapter includes required data for receiving, unpacking, inspecting, and setup of the unit.
We can also provide the assistance of a factory-trained technician to help train your operator(s) for a
nominal charge. This section includes instructions, checks, and adjustments that should be followed before
commencing with operation of the Temperature chamber. These instructions are intended to supplement
standard laboratory procedures performed at daily and weekly intervals.
The Operation chapter includes a description of controller features along with temperature and agitation
parameter setting instructions, multi-segment program setting instructions and instructions for changing the
type of agitation and agitation amplitude.
The Accessories and Option chapter is your source for information on available accessories and option
with brief information.
The Appendix contains technical specifications, warranty and Jeio Tech technical support contact
information.
1.1.3 Model number nomenclature
This manual covers all five models of the Temperature chambers series. The following describes the model
number nomenclature used in throughout the manual.
TC-ME-025
TC-ME-065
TC-ME-100
chamber capacity (25L)
chamber capacity (65L)
chamber capacity (100L)