Jeio tech TC-ME-025 Operating Manual page 13

1.3.2 Safety symbols
Safety symbols are graphic representations—of a hazard, a hazardous situation, a precaution to avoid a
hazard, a result of not avoiding a hazard, or any combination of these messages—intended to convey a
message without the use of words. The following safety symbols are used in this manual.
Mandatory
00HAA0001203 (Rev 1.0)
Read manual
Wear a face mask
Wear gloves
Wear goggles
WARNING
Safety Alert Symbol.
General caution.
Electrical shock
Flammable or fire
could be caused.
Sharp points
Prohibition
No direct sunlight
No high frequency
noise
No corrosive
fluid or cleaners
No water
Hand crush or pinch
Foot crush
Lifting hazard