Prog Mode; Prog Control - Jeio tech TC-ME-025 Operating Manual

4.2.2 PROG Mode

4.2.2.1. PROG Control

PROG Mode
1. Turn on Main Power Switch.
2. Set each SEGMENT and PATTERN for PROG RUN
PROGRAM EDITING
→ PROGRAM →
PATTERN EDIT
1. Set value of temperature, Humidity, and running time at each SEGMENT.
(Input the value by UP, DOWN, SHIFT KE, SET KEY)
PT NO : Set PATTERN No.
STC : Set Start Code SSP, S.PV, T.PV
SSP : Set Start SET POINT
USED PT(SEG) : Indicates number of used PATTERN and SEGMENT
Input the set value and running time for each SEG and set Time
Signal1,2,3,4,5.
Time Signal can be adited in "SETUP MENU → TIME SG"
EDIT SEGMENT
Press SET KEY when the numbers(001, 002, ...) below SG in Previous screen
are pointed, then it moves to the applicable screen.
Press UP, DOWN KEY for copy or erase the set SEGMENT and press SHIFT
KEY to go back to previous screen.
→ EDIT SET →