Fix Display - Jeio tech TC-ME-025 Operating Manual

Switching display between FIX and PROG
Press SET KEY for 6 seconds then, enter to MAIN MENU 2 screen.
Press SET KEY for 3 seconds or no Key for 60 seconds to go back to operating
display.
SET FUNCTION
OPER MODE: FIX/PROG(Use key to choose mode)

4.2.1.2. FIX Display

FIX STOP
FIX Control means that to control the temperature by specific set value(SP).
FIX STOP : It indicates stop of running.
SP : temperature value for running.
Set the temp. value by pressing.
READY : Stand-by status.
Press RUN/STOP key for 3 seconds to start operating.
FIX RUNNING(The First Screen)
FIX RUNNING : Unit is running
PROCESS TIME : It indicates running time of unit.
IS : It indicates number of Inner Signal operation.
FIX RUNNING(The Second Screen)
PV : Indicates the present Temperature and Humidity
MV : Indicates the current output
RUN PID NUMBER : Indicates the number of operating PID NUMBER
00HAA0001203 (Rev 1.0)