Table of Contents
Advertisement
(1) Controller
All functions are shown on the LCD Display screen with graphic & characters.
Easy operation to push the control buttons.
All the status of operation is monitored by graphic mode.
Total Max. 100 programmable segments
Max. 30 patterns supported by each segment.
(2) Recorder(Optional)
- 6 points, can display, record and store all temperature & humidity testing
Values and profiles.
- Each channel is sorted out & shown on the display by temp. & Humid.
- Recording range: -60 to 150 / 0 to 100% RH
- Paper wide: 100mm
- Portable type
- 6 dots (Temperature: 5 dots, Humidity: 1 dot)
- Digital display
- Free power supply (100V to 240V)
(3) Handle
- Comfortable & easy for user's opening & closing by using plastic mold
- Easy handing for opening & closing by little power.
- Durable design for the air-tight sealing.
(4) Cool Air inhalation & Hot Air ventilation Hole
This perforated air ventilation hole to be drawn
A cool air is provided for cooling down the heat
Generated from the motor & stabilizer, etc
On the upper part, and 2 rectangular fans located
On the rear part of the unit are provided
For better exchange heat capacity and better performance
Of the unit.
(5) Access port
- Basic access port is Ø50mm, and each Ø50mm or
Ø80mm Access port can be added upon user's request.
-Access port is used for the passing the power cable
Thru chamber for the sample test of electronic components or other
Devices
(6), (7) Condensing air ventilation Hole
Air ventilation holes (perforated plate) are located on the left side & bottom of the rear part of the unit, so hot air will
be drawn off from the refrigerating system thru this ventilation holes. And air pre-filter and air-blowing perforate plate
is installed in front of condensing unit for air ventilation.
(8) Water Tank
In order to check the water volume directly and prompt response to problems, water tank (15L) is located on the
front side.
For easy supplying water, Sliding rails are installed. Auto water filling system is recommendable for the
comfortable and more than the capacity of a water tank (15L). Basic water tank consists of 5, 6, 9L.
Water purifier is also recommendable when required the cleanliness control of test sample, or products.
- TC-ME, PE - 025 : 5.0L
- TC-ME, PE - 065 : 6.0L
- TC-ME, PE - 100 : 9.0L
(9) Hinge
Its material is strong enough to stand the heavy weight load.
- KNUCKLE JOINT made of stainless steel, excellent in strength &
Durability.
- Stainless cover boasts of appearance in splendor.
00HAA0001203 (Rev 1.0)
Advertisement
Table of Contents
