Chapter 1 - Introduction; What The Belt Stacker Does - Pitney Bowes F680 Operator's Manual

What the Belt Stacker Does

General
The stacker is designed as an output device for a range of Inserting
Systems and also as a general output device for other machines such as
address printers.
This guide covers use of the belt stacker in all configurations.
Configurations
The belt stacker can operate at right angles (to the left or right) and also
in-line with the machine outputting to it, depending on machine and/or
material being used.
SV40231 Rev. B
Inserter
Belt
Stacker
Belt
Stacker
Inserter
Inserter
Belt Stacker positioned
at right angles to the
right
Belt Stacker positioned
at right angles to the
left
Belt Stacker
Introduction • 1
Belt Stacker positioned
'in line'
1-1