Module Programming; Push-To-Start (Pts) Vehicles - Directed Directechs DB3 Installation Manual

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Push-to-Start (PTS) vehicles

1
Wait until the LED turns ON solid red.
Press on the Push-to-Start (PTS) button once to turn the ignition ON. The LED will remain ON
2
solid green for 3 seconds, and will then turn OFF.
Press the PTS button once more to turn the ignition OFF once the module is successfully
3
programmed.
You have successfully completed the module programming sequence.
13
403.FORD12 1.60 2015 Lincoln MKZ Hybrid (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.