Directed 403.VW10 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 403.VW10
  6. Installation manual

Directed 403.VW10 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
403.VW10
DB3
v2.00
2008 Volkswagen GTI

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 403.VW10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Directed 403.VW10

Summary of Contents for Directed 403.VW10

  • Page 1 403.VW10 v2.00 2008 Volkswagen GTI...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Immobilizer interface with OEM immobilizer receiver Vehicle connections Module programming Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick Reference Guide (customer copy)

  • Page 3: Introduction

    Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Control of aftermarket alarm with OEM remote Brake Status (foot brake) Fuel level/EV battery level Door Locks Status * Odometer E-Brake Status Universal RF Bypass- Key Req'd Ignition Status RAP Shut Down (Retained ACC Power) 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [2] Tach wire: Optional connection required on some remote starters, which do not support a tach signal in D2D. [3] Key Wrap: Refer to "Immobilizer interface with OEM immobilizer receiver" section for instructions. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    VESCM Connector L (under driver’s dash or behind glove box) Parking Lights Interr.: Red/White, pin 8 Headlight switch (black conn. at light switch) (+) Parking Lights: Gray/Yellow, pin 3 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Immobilizer Interface With Oem Immobilizer Receiver

    IMPORTANT!: Not all OEM remotes can be inserted in 556UXL because of their size. Make sure the key will fit, otherwise it is recommended to use a different method. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 - Make 4-6 loops and place them around the front of the plastic body of the vehicle’s coded key as shown above. - Test and secure mounted loops before reassembling the vehicle. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 10: Vehicle Connections

    No Connection No Connection H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter Input 10-pin black connector (H3) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 11 Black/Red (test with ignition on) Ignition Steering Column Module, black 20 pin plug, pin 17 Black Starter Steering Column Module, black 20 pin plug, pin 18 Red/Black or Red/Brown 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 12: Module Programming

    Press unlock on the OEM FOB then insert key into key switch and turn ignition ON. The LED flashes green. Wait for LED to turn solid green for 3 seconds then OFF. Turn the ignition OFF. You have successfully completed the module programming sequence. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 13: Connecting The Module

    4-pin D2D harness. (12-pin) (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 14: Led Diagnostics And Troubleshooting

    5 times to skip this step. Flashes red x 11 BCM programming. Failed to program the BCM. Check if doors are unlocked. If so, unlock them to solve the problem. Flashes red x 12 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 18: Feature And Option List

    Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the 2. Safelock beginning of the sequence, and relock after start and shutdown. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 19: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 20: Quick Reference Guide (Customer Copy)

    • Aftermarket remote. Send the Unlock command on the factory or aftermarket Press Unlock on • Directed SmartStart application via your smartphone. either remote* remote.* If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly on your factory remote.
  • Page 21 Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. 403.VW10 2.00 2008 Volkswagen GTI ©2022 VOXX•DEI LLC. All rights reserved.

This manual is also suitable for:

Db3

Table of Contents