Download
Share
Print this page
Directed DIRECTECHS DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual

Directed DIRECTECHS DB3 Installation Manual

2015 subaru forester - 403.subaru2 1.25
Hide thumbs Also See for DIRECTECHS DB3:

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
DB3
2015 Subaru Forester - 403.SUBARU2 1.25
Designed by Installers for Installers
© 2017 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

loading

Related Manuals for Directed DIRECTECHS DB3

Summary of Contents for Directed DIRECTECHS DB3

  • Page 1 2015 Subaru Forester - 403.SUBARU2 1.25 Designed by Installers for Installers © 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...

  • Page 2: Table Of Contents

    Contents Introduction Pre-installation and application warnings Wiring diagram Key release connection Vehicle connections Key2GO Connecting the module Module programming LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick reference guide...
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.

  • Page 4: Introduction

    • RS-SmartStart • RS-Tach / RPM Output • SS-Entry Monitoring ALL Door Pins • SS-Entry Monitoring Trunk/Hatch Pin • ST-Brake Status (foot brake) • ST-E-Brake Status • ST-Ignition Status 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    "LED Diagnostics & Troubleshooting" for more information. Additional parts required (maximum required): Resistor 100Ω Fuse 7.5A Diode 6A 0 x 1A Diodes 0 x Resistor 0 x Fuse 1 x Relay 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.

  • Page 6: Wiring Diagram

    (+) Brake Status: Gray: 6 2: Blue: (-) Unlock Input Keyless Data (conn. side): Yellow/Black: 10 Immo. Data (veh. side): Orange/Black: 11 1: Green: (-) Lock Input Not required in D2D mode. 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.

  • Page 7: Key Release Connection

    (-) Key Release 2: pin 3 7 6 5 (-) Key Release Output: Blue/Red: 12 (+) 12V (+) Key Release 1: pin 4 B281, 35-pin white conn. (B) (right of steering column) Connector location 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.

  • Page 8: Vehicle Connections

    (Data) Immo Data BIU behind dash fuse box, white 34 pin plug (A), pin 31 data red/yellow H2/12 Blue/Red (-) W2W Only - Key Release Output Must use a relay. 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.
  • Page 9 Color Description H4/1 Green (Data) TX H4/2 Black (-) Ground H4/3 Blue (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 H5/2 403.SUBARU2 1.25 2015 Subaru Forester © 2017-01-27 Directed. All rights reserved.

  • Page 10: Key2Go

    Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.