A40-D Double Knife - MacDon A30-S Assembly Instructions Manual

f. Open shield on header LH side.
J
g. Sickle drive belt (J) should deflect 0.55 inch
(14 mm) when a load of 5-6.5 lbf (22-30 N) is
applied at mid-span).
h. Auger drive chain (K) deflection should be ¼
inch (6 mm).
Auger drive belts (L) should deflect 3/16 in. (4
i.
mm) when a load of 8-12 lbf (35-40 N) is applied
to each belt at mid-span.
j. Close shield.
k. Proceed to Section B, AUGER STRIPPER BAR
CLEARANCE.
III. A40-D DOUBLE KNIFE
a. Open shield on header RH side.
A40-D
b. Sickle drive timing belt (M) should deflect 0.55
inch (14 mm) when a load of 5-6.5 lbf (22-30 N)
is applied at mid-span).
Form # 169078
PRE-DELIVERY CHECKS
L
K
A30-D
M
c. Open shield on header LH side.
d. Sickle drive timing belt (N) should deflect 0.55
inch (14 mm) when a load of 5-6.5 lbf (22-30 N)
is applied at mid-span).
e. Sickle drive V-belts (O) should deflect 3/16 in.
(4 mm) when a load of 8-12 lbf (35-40 N) is
applied to each belt at mid-span.
f. Close shields.
34
N
A40-D
Model Year - 2009
O