Table of Contents
Advertisement
7.6.1.7
"ALARM CURRENT" parameter
Not with fieldbus transmitters
7.6.1.8
"DISPLAY" parameter
Select LCD display value 1, 2, or 3 (permanent display).
The following values can be displayed:
•
Output signal in physical unit
265G: Current measured value for gauge pressure, or variable derived from this, such as the
fill level
265A: Current measured value for absolute pressure; with customized unit; corresponds to
"OUT" with PROFIBUS PA
Setting changes under "OUT 0%" and "OUT 100 %"; desired unit under "UNIT_OUT"
•
Percentage value of output signal
•
Output current (not with fieldbus transmitters)
7.6.1.9
"UNIT - p/dp" parameter
Selection list of pressure units for the pressure/differential pressure detected by the sensor,
including for LCD display code no. 8 under "VIEW"
7.6.1.10 "UNIT - OUT" parameter
Selection list of "OUT" units (for output variables, e.g., m
including for LCD display code no. 1 under "VIEW" or "DISPLAY"
7.6.1.11 "CUSTOM" parameter
Activation/deactivation of a freely programmable characteristic
7.6.1.12 "ADDRESS" parameter
Only with fieldbus transmitters
IM/265Gx/Ax-EN-07
265Gx, 265Ax
Configuration
3 ,
m, l/h)
61
Advertisement
Table of Contents
