Table Of Contents - ABB 265GS Operating Instruction

Pressure transmitter

Table of Contents

Safety.............................................................................................................................................................6

1.1

General information and notes for the reader ................................................................................................6

1.2

Intended use...................................................................................................................................................6

1.3

Technical limit values .....................................................................................................................................6

1.4

Improper use ..................................................................................................................................................7

1.5

Target groups and qualifications ....................................................................................................................7

1.6

Warranty provisions........................................................................................................................................7

1.7

Plates and symbols ........................................................................................................................................8

1.7.1

Safety-/ warning symbols, note symbols.................................................................................................8

1.8

Name plate .....................................................................................................................................................9

1.8.1

Compliance with Pressure Equipment Directive (97/23/EC) ................................................................11

1.9

Transport and storage ..................................................................................................................................12

1.10

Safety instructions for electrical installation .................................................................................................12

1.11

Safety information for inspection and maintenance .....................................................................................12

1.12

Returning devices.........................................................................................................................................13

1.13

Integrated management system...................................................................................................................13

1.14

Disposal........................................................................................................................................................13

1.14.1

Information on WEEE Directive 2002/96/EC (Waste Electrical and Electronic Equipment).................13

1.14.2

RoHS Directive 2002/95/EC .................................................................................................................14

Use in potentially explosive atmospheres...............................................................................................15

2.1

Type-examination certificate/Declaration of conformity ...............................................................................15

2.2

Type of protection "intrinsic safety Ex i" .......................................................................................................15

2.3

Use in areas with combustible dust..............................................................................................................16

2.4

Category 3 for use in "Zone 2" .....................................................................................................................16

2.5

Type of protection "flameproof enclosure Ex d" ...........................................................................................17

2.6

Type of protection "intrinsic safety i", "flameproof enclosure d", "protection by enclosure tD", and "non-

sparking nA" .................................................................................................................................................18

2.7

Canadian Standards Association (CSA): "Explosion-proof" ........................................................................18

2.8

Aspects of "Ex safety" and "IP protection" for Australian applications.........................................................19

Design and function...................................................................................................................................21

3.1

Principle of operation and construction ........................................................................................................22

Mounting .....................................................................................................................................................25

4.1

General.........................................................................................................................................................25

4.2

IP designation...............................................................................................................................................25

4.3

Pressure transmitter .....................................................................................................................................26

4.4

Sealing and screw connections....................................................................................................................26

4.5

Moisture........................................................................................................................................................27

4.6

Impulse line ..................................................................................................................................................27

Electrical connections ...............................................................................................................................28

5.1

Cable connection..........................................................................................................................................28

5.2

Electrical connection in the cable connection area ......................................................................................29

5.3

Electrical connection with plug .....................................................................................................................31

5.4

Assembling and connecting the socket connector.......................................................................................32

5.5

Protective conductor / Grounding.................................................................................................................33

5.6

Integrated lightning protection (optional)......................................................................................................33

5.7

Communication setup...................................................................................................................................34

5.8

Connecting cable..........................................................................................................................................36

IM/265Gx/Ax-EN-07

265Gx, 265Ax

Contents