Appendix; 11.1 Approvals And Certifications - ABB 265GS Operating Instruction

Appendix

11 Appendix

11.1 Approvals and certifications

Zu
Symbol
CE mark
Explosion
protection
approvals
IMPORTANT (NOTE)
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.com/pressure
84
Description
The CE mark indicates that the device complies with the following directives and
their basic safety requirements:
• CE mark on the name plate of the pressure transmitter
 Conforms to EMC Directive 2004/108/EC
 Conforms to Low Voltage Directive 2006/95/EC
 Conforms to Pressure Equipment Directive (PED) 97/23/EC
By placing the CE mark on its devices, ABB Automation Products GmbH declares
that they conform to these directives.
This symbol indicates devices with an explosion-proof design.
With Ex designs, if this symbol appears on an additional name plate it means that
the following also applies:
 Conformity to ATEX Directive 94/9/EC
By placing the Ex mark on its devices, ABB Automation Products GmbH declares
that they conform to this directive.
265Gx, 265Ax IM/265Gx/Ax-EN-07