Debugging The Project - Renesas RX Series User Manual

Renesas Solution Starter Kit for RX23W

6. Debugging the Project

6. Debugging the Project
In the Project Explorer pane, ensure that the 'SC_Tutorial' project is selected. To enter the debug
configurations, click upon the arrow next to the debug button and select 'Debug Configuration'.
Figure 6-1 Debug Configurations
In order to execute the project, it is necessary to change the following settings in 'Renesas GDB Hardware
Debugging' -> 'SC_Tutorial HardwareDebug' -> 'Debugger' -> 'Connection Settings'.
Ensure that in 'Connection Settings' tab that the 'Power Target From The Emulator (MAX 200mA)' is set to
Yes, and 'Main Clock Source' is set to HOCO.
For more information on powering the RSSKRX23W please refer to the User's Manual.
Figure 6-2 Connection Settings
When the setting is complete, press the 'Apply' button followed by the "Close" button to close the debug
configuration window.
R20UT4449EG0100 Rev. 1.00 Page 59 of 64
Aug.30.19