Renesas Solution Starter Kit for RX23W
4. Smart Configurator Using the e
studio
2
4.5.4
Ports
Referring to the RSSK schematic, LED0 is connected to P41, LED1 is connected to P42, LED2 is connected
to P43 and LED3 is connected to P44. PE3 is used as one of the LCD control lines, together with PB3, P03
and PJ3.
Click 'Add component'
icon. In 'Software Component Selection' dialog -> Type, select 'Drivers'.
Select 'Ports' as shown in Figure 4-18 then click 'Next'.
Figure 4-18 Select Ports
In 'Add new configuration for selected component' dialog -> Resource, select 'PORT' as shown in Figure 4-19
below then click 'Finish'.
Figure 4-19 Select Resource – PORT
R20UT4449EG0100 Rev. 1.00
Page 23 of 64
Aug.30.19