Project Creation With E Studio; Introduction; Creating The Project - Renesas RX Series User Manual

Renesas Solution Starter Kit for RX23W
3. Project Creation with e
3.1

Introduction

In this section, the user will be guided through the steps required to create a new C project for the RX23W
MCU, ready to generate peripheral driver code using Smart Configurator. This project generation step is
necessary to create the MCU-specific source, project and debug files.
3.2

Creating the Project

• Start e studio and select a suitable location
2
for the project workspace.
• In the Welcome page, click 'Create a new
C/C++ project'.
In the 'Templates for New C/C++ Project'
•
dialog, selecting 'Renesas RX' -> 'Renesas
CC-RX C/C++ Executable Project'.
• Click 'Next'.
R20UT4449EG0100 Rev. 1.00
Aug.30.19
studio
2
3. Project Creation with e
Page 10 of 64
studio
2