Renesas Solution Starter Kit for RX23W
4. Smart Configurator Using the e
studio
2
Peripheral function configuration is now complete.
Save the project using the File -> Save, then click
'
Generate Code' at location of Figure 4-46.
Figure 4-46 Generate Code Button
The Console pane should report 'Code generation is successful', as shown Figure 4-47 below.
Figure 4-47 Smart Configurator console
4.7
Building the Project
The project template created by Smart Configurator can now be built. In the Project Explorer pane expand the
'src' folder then smc_gen folder.
Figure 4-48 Generated folder structure
Switch back to the 'C/C++' perspective using the
button on the top right of the e
studio workspace.
2
Select SC_Tutorial in the Project Explorer pane, then use 'Build Project' from the 'Project' menu or the
button to build the tutorial. The project will build with no errors.
R20UT4449EG0100 Rev. 1.00
Page 39 of 64
Aug.30.19