Additional Include Paths - Renesas RX Series User Manual

Renesas Solution Starter Kit for RX23W 5. User Code Integration
5.3

Additional include paths

Before the project can be built the compiler needs some additional include paths added. Select the
SC_Tutorial project in the Project Explorer pane. Right click in the Project Explorer window and select
[Properties]. Navigate to 'C/C++ Build -> Settings ->Compiler -> Source and click the button as shown in
Figure 5-2.
Figure 5-2 Adding additional search paths
In the 'Add directory path' dialog, click the 'Workspace...' button and in the 'Folder selection' dialog browse to
the 'SC_Tutorial/src' folder and click 'OK'. e studio formats the path as shown in Figure 5-3 below.
2
Figure 5-3 Adding workspace search path
Close the property by clicking the 'Apply and Close' button shown in Figure 5-2, and when the 'Settings'
dialog shown in Figure 5-4 is appeared, click 'Yes' to finish the setting.
Figure 5-4 Settings dialog
Select 'Build Project' from the 'Project' menu, or use the button. e studio will build the project with no
2
errors.
The project may now be run using the debugger as described in §6. The program will display 'RSSKRX23W
Tutorial Press Any Switch' on three lines in the LCD display.
R20UT4449EG0100 Rev. 1.00 Page 45 of 64
Aug.30.19