If the Flexible Disk Drive Does Not Work
Ensure you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the right density.
•
Check that your flexible disk drive is correctly configured in the
•
Setup Configuration menu.
Check the option on the Setup
•
enables or disables the on-board flexible disk controller.
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the flexible disk drive has been enabled in Setup.
•
Flexible disk drive
•
Boot on flexible disk drive
•
Write on flexible disk drives.
•
Check that the disk power and data cables are correctly connected.
•
If the Hard Disk Does Not Work
Check that the disk power and data cables are correctly connected
•
(refer to "Connecting IDE Devices", on page 21).
Check that the hard disk drive has been "enabled". There is also an
•
option in the Setup program that lets you disable or enable boot on
hard disk drive.
Check that the hard disk drive has been detected.
•
Check that the on-board Bus IDE is enabled if you are using the
•
integrated IDE controller.
4 Troubleshooting Your PC
If Your PC Has a Hardware Problem
menu which
Configuration
English
51
4