geron.bk : geron-3.fb4 Page 62 Sunday, March 22, 1998 5:03 AM
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
If Your Printer Does Not Work
Make sure the printer's power switch is ON.
•
Verify that the power cord is plugged into the power outlet and the
•
printer.
Verify that you have the correct cable for the printer. Make sure that
•
it is securely connected to the correct connector (port) on the
PC Workstation and printer.
Check that the printer is online.
•
Examine the paper feed mechanism for a paper jam.
•
Make sure that the printer is configured correctly for the
•
PC Workstation and for the application.
a Ensure the PC Workstation's port has been correctly configured
using Setup.
b Make sure the printer is correctly set up in your operating
system's configuration.
c Ensure the application program's "print" menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
Check that the PC Workstation's port is working properly by running
•
another peripheral connected to the port.
If you receive an error message, refer to the printer's manual for help.
•
If the Flexible Disk Drive Does Not Work
Check that you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the correct density.
•
Check that the flexible disk drive is correctly configured in the Setup
•
program (Advanced > Flexible Disk Drive).
Check that the flexible disk drive is not disabled in the Setup
•
program (Advanced > Flexible Disk Drive).
62
English