If The Flexible Disk Drive Does Not Work; If The Hard Disk Does Not Work - HP Vectra XM 5Series User Manual

4 pcs
Table of Contents

Advertisement

Make sure that the printer is configured correctly for the PC and for the application.
a
Ensure the PC's port has been correctly configured using Setup .
b
Make sure the printer is correctly set up in your operating system's configuration.
c
Ensure the application program's "print" menu has been correctly set up. (Refer to the
manual supplied with the application software.)
Check that the PC's port is working properly by running another peripheral connected to
the port.
If you receive an error message, refer to the printer's manual for help.

IF THE FLEXIBLE DISK DRIVE DOES NOT WORK

Ensure you are using a formatted diskette and it is inserted correctly.
Check you are using a diskette that is the right density.
Check that your flexible disk drive is correctly configured in the Setup Configuration
menu.
Check that the flexible disk drive has been enabled in Setup .
Flexible disk drive (refer to Hardware Protection Submenu (Security group))
Boot on flexible disk drive (refer to "Start from Flexible Disk")
Write on flexible disk drives (refer to "Hardware Protection Submenu" (Security
group)).
Check the option on the Setup Configuration menu which enables or disables the on-
board flexible disk controller.
Check that the disk power and data cables are correctly connected.
Clean the flexible disk drive using a diskette cleaning kit.

IF THE HARD DISK DOES NOT WORK

Check that the disk power and data cables are correctly connected.
Check that the hard disk drive has been "enabled" (refer to Hardware Protection Submenu
(Security group)). There is also an option in the Setup program that lets you disable or
enable boot on hard disk drive (refer to Start-up Center Submenu (Security group) in
chapter 3).
Check that the hard disk drive has been detected (refer to IDE Devices Submenu
(Configuration group) in chapter 3).
Check that the on-board Bus IDE is enabled if you are using the integrated IDE controller
(refer to IDE Devices Submenu (Configuration group) in chapter 3).

Advertisement

Table of Contents
loading

Table of Contents