2
2 How to Install Accessories In Your PC
Installing Mass Storage Devices
Installing an IDE Hard Disk Drive in the Bottom Shelf
Refer to the drive's manual to see if you must set jumpers or if there is
a special installation procedure to follow.
1 Disconnect the computer's power supply cord from the power outlet,
and disconnect the PC from any telecommunications network.
2 Remove the computer's cover.
3 Remove the CD-ROM drive (if present) from the middle shelf or
remove the middle bezel.
4 Remove the two bezels from the bottom shelf. The bezels snap in and
out, and can be removed without any tools.
5 Support the power supply with your hand (to prevent it falling out)
and carefully turn the PC onto its side.
26
English