If The Flexible Disk Drive Does Not Work - HP Kayak XW U3-W3 Troubleshooting Manual

HP Kayak XW U3 & W3 PC Workstation Troubleshooting Your HP PC Workstation
Make sure that the printer is configured correctly for the
•
PC Workstation and for the application.
a Ensure the PC Workstation's port has been correctly configured
using Setup.
b Make sure the printer is correctly set up in your operating
system's configuration.
c Ensure the application program's "print" menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
Check that the PC Workstation's port is working properly by running
•
another peripheral connected to the port.
If you receive an error message, refer to the printer's manual for help.
•

If the Flexible Disk Drive Does Not Work

Check that you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the correct density.
•
Check that the flexible disk drive is correctly configured in the Setup
•
program (Advanced > Flexible Disk Drive).
Check that the flexible disk drive is not disabled in the Setup
•
program (Advanced > Flexible Disk Drive).
Check that the Flexible Disks item and the Write on Flexible Disks
•
item are not set to locked in the Setup program (Security > Hard-
ware Protection).
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
•
If Your PC Workstation Has a Hardware Problem
English
15