If The Cd-Rom Drive Has A Problem - HP Vectra VE5 3 User Manual

Hp vectra ve5 3: users guide
Hide thumbs Also See for Vectra VE5 3:
Table of Contents

Advertisement

If the Hard Disk
Activity Light Does
Not Work
NOTE
WARNING
4
4 Troubleshooting Your PC
If Your PC Has a Hardware Problem
If the hard disk activity light does not flicker when the PC is accessing
the hard disk drive:
Check that the control panel connector is firmly attached to the
system board.
Check that the disk power and data cables are correctly connected.
If you are using a hard disk drive with a controller board (a SCSI hard
disk, for example), the activity light does not flicker when the PC is
accessing the hard disk drive

If the CD-ROM Drive Has a Problem

Be sure to disconnect the power cord and any telecommunication
cables from your computer before you remove the cover to check the
cable connections or jumper settings.
To avoid electric shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The CD-ROM drive should be
serviced by qualified service personnel only. Do not attempt to make
any adjustment of the unit. This PC is a class 1 laser product.
No Sound from the CD-ROM Drive
If you are having problems with sound when playing a CD:
Check that the volume control (if present) on the CD-ROM drive
front panel is not set to the minimum.
Ensure that the disk in the CD-ROM drive is an audio disk and not a
Photo CD or data CD.
If using headphones or external speakers, check that they are
properly connected.
Check that the CD audio cable is correctly installed and is connected
to the sound accessory board if one is fitted.
52
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra ve 5/xxx series

Table of Contents