If the Hard Disk Activity
Light Does Not Work
HP Kayak XA 05xx PC Workstation —Troubleshooting Your HP PC Workstation
If the Flexible Disk Drive Does Not Work
Check that you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the correct density.
•
Check that the flexible disk drive is correctly configured in the Setup
•
program (
Advanced > Flexible Disk Drive
Check that the flexible disk drive is not disabled in the Setup
•
program (
Advanced > Flexible Disk Drive
Check that the
•
Flexible Disks
set to locked in the Setup program (
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
•
If the Hard Disk Drive Does not Work
Check that the disk power and data cables are correctly connected.
•
For an IDE drive, check the IDE Device's configuration settings in
•
the Setup program (
For an IDE drive, check the Hardware Protection settings in the
•
Setup program (
For an IDE drive, check the Boot Device Security settings in the
•
Setup program (
For a SCSI drive, check the SCSI Interface settings in the Setup
•
program (
Advanced > External/Internal 16/8 bit SCSI
SCSI Configuration Utility).
If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
Check that the control panel connector is firmly attached to the
•
system board.
Check that the disk power, external start and data cables are
•
correctly connected.
If Your PC Workstation Has a Hardware Problem
).
).
and the
Write on Flexible Disks
Advanced > IDE Devices
Security > Hardware Protection
Security > Boot Devices Security
items are not
Security > Hardware Protection
).
).
).
(Symbios) and in the
).
English
15