Unpacking Your Pc - HP Vectra VE5 3 User Manual

WARNING
1
Operating System
Installation Tools
1 Setting Up and Using Your PC

Unpacking Your PC

Unpacking Your PC
If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
1 When you receive your PC, unpack all the components.
Computer
Computer Power Cord
Keyboard
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Place the display on top of the computer. If you have a large display,
place it next to the computer. Refer to the display's manual for
information about the display.
Your PC's operating system is preloaded on your PC's hard disk.
No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, see
chapter 2, How to Install Accessories In Your PC.
2 English
Typical
Display
Mouse
Display Power Cord
Manuals