Moving And Replacing The Power Supply - HP Vectra VE5 3 User Manual

2
2 How to Install Accessories In Your PC

Moving and Replacing the Power Supply

Moving and Replacing the Power Supply
You must move the power supply to access the sockets for the main
memory, video memory, processor, battery, or accessory board slots.
1 Disconnect the computer's power supply cord and any connection to
a telecommunications network. Remove the computer's cover.
2 Lift the front of the power supply to disengage the hinge on the rear.
Lift the power supply clear and lay it upside down on the frame
above the disk drives.
3 Before replacing the power supply, ensure that you have installed all
your accessories in the PC. Replace the power supply on the left-
hand side of the PC, and ensure that the cables are neatly routed
around any accessory boards.
4 Raise the front of the power supply and engage the hinge on the rear.
Lower the front of the power supply into position so that it rests on
the front panel.
16 English