HP Vectra VE5 3 User Manual page 41

Heat Sink
5 To install the new processor:
a Locate the corner marker (a dot or notch and a 'broken' corner)
on the processor
b Align the corner marker on the processor with the top-left corner
of the socket (see the previous diagram) and place the processor
into the socket.
c Close the lever to lock the processor into place.
d If your processor operates at 120 MHz or greater and has a
separate heat sink, add a drop of 'thermal compound' to the top
of the processor.
e Replace the heatsink and fasten the clip (if the heatsink is not
already directly attached to the processor).
2 How to Install Accessories In Your PC
Installing an Upgrade/Overdrive Processor
Processor
2
English 31