Installing The Security Bracket - HP Vectra VE5 3 User Manual

2
2 How to Install Accessories In Your PC

Installing the Security Bracket

Installing the Security Bracket
The security bracket supplied with the computer can be used to fasten
the computer to your desk.
1 Remove the computer's cover (refer to "Removing and Replacing the
Cover", on page 15).
2 Remove the security bracket from the storage position.
3 Insert the security bracket, from inside the computer, into the slot
shown in the diagram above.
4 Press it firmly until it snaps into place.
5 Install any other accessories before replacing the cover.
36 English
Remove the
bracket from the
storage position
Insert the
bracket
in the computer