Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual page 44

Error Messages
Error Message
The paper is too small.
Paper jam. Lift the release lever.
Paper jam. Manually rewind the
roll all the way and press OK.
Cause
When the Detect Mismatch menu
is set to Pause , the paper loaded
in the printer is smaller than the
size specified in the printer driver.
When the Detect Mismatch
menu is set to Warning , the paper
loaded in the printer is smaller than
the size specified in the printer
driver.
A paper jam occurred in the printer
during printing.
A paper jam occurred when
advancing the paper.
Corrective Action
Press the Online button to resume printing.
However, note that this error may cause paper jams
and affect the printing quality.
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1. Hold down the Stop button for a second or more to
cancel printing.
2. Change the paper size setting in the printer driver to
the size loaded in the printer and try printing again.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1. Hold down the Stop button for a second or more to
cancel printing.
2. Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
You can continue to print, but note that this error may
cause problems in the printing results.
1. Lift the Release Lever and remove the jammed
paper.
(→ , If Roll Paper Jams)
(→ , If a Sheet Jams)
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
1. Rewind paper on the Roll Holder manually, all the
way, and then press the OK button.
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
44