Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual page 43

Error Message
Maintenance cartridge problem.
Maintenance cartridge full.
Wrong maintenance cartridge.
Prepare for maint cart
replacement.
No Maintenance Cartridge
capacity.
Insert the maintenance
cartridge.
Paper cutting failed.
Cause
An incompatible or used
Maintenance Cartridge has been
installed.
The Maintenance Cartridge is full.
A Maintenance Cartridge for
a different model of printer is
installed.
The Maintenance Cartridge is
almost full.
The Maintenance Cartridge cannot
absorb enough ink for Printhead
cleaning or other operation.
The Maintenance Cartridge is not
installed.
There are sheets left on the
Ejection Guide .
There is a foreign object by the
Output Tray , obstructing the
Cutter Unit .
You are not using the printer under
the recommended environmental
conditions for the paper.
You are using paper that is not
compatible with automatic cutting.
The Cutter Unit stops in the
middle of cutting.
In other cases, the Cutter Unit
may be damaged.
43
Corrective Action
Install an unused Maintenance Cartridge specified for
use with the printer.
(→ , Replacing the Maintenance Cartridge)
After confirming that the printer has stopped
operating, replace the Maintenance Cartridge .
(→ , Replacing the Maintenance Cartridge)
Replace it with the Maintenance Cartridge for your
particular model.
You can continue to print, but prepare a new
Maintenance Cartridge to use when the message for
replacement is displayed.
After confirming that the printer has stopped
operating, replace the Maintenance Cartridge .
(→ , Replacing the Maintenance Cartridge)
Install the Maintenance Cartridge .
(→ , Replacing the Maintenance Cartridge)
1. Lift the Release Lever and remove the paper.
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see the Paper Reference Guide .
(→"Types of Paper," User Manual)
Specify Manual as the cutting method and cut the roll
manually.
(→"Specifying the Cutting Method for Rolls," User
Manual)
For information about paper that is compatible with
automatic cutting, see the Paper Reference Guide .
(→"Types of Paper," User Manual)
If the Carriage is out, move the Carriage out of the
way, away from the paper.
If the Cutter is out, move the Cutter to the right side
(away from the paper) and remove the jammed paper.
(→ , If Roll Paper Jams)
If the paper cannot be cut using the Cutter Unit ,
specify Manual as the roll cutting method and cut the
roll manually.
(→"Specifying the Cutting Method for Rolls," User
Manual)
Contact your Canon dealer for assistance.
Error Messages