Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual page 34

Error Messages
Error Message
GARO Wxxxx (x represents a
number)
GL2: W0502 The parameter is
out of range.
GL2: W0504 This command is
not supported.
GL2: Wxxxx The memory is full.
(xxxx is 0501, 0903, or 0904)
No ink left.
Ink insufficient.
Not much ink is left.
Close Ink Tank Cover
Ink tank is empty.
No ink tank loaded.
Wrong ink tank.
Remaining level of the ink
cannot be correctly detected.
Cause
There is a problem with the print
job.
A parameter specified in a HP-
GL/2 command is out of the
supported range.
The printer has received an
unsupported HP-GL/2 command.
The printer memory became full
while processing the job received.
There is no ink left.
The ink level is low, so you cannot
print, clean the Printhead , or do
other operations that require ink.
Not much ink is left.
The Ink Tank Cover is open.
There is no ink left in an ink tank.
There is no Ink Tank of the
indicated color in the printer.
There is a problem with the Ink
Tank .
The Ink Tank in the printer is
incompatible.
Ink level detection cannot work
correctly if you use refill ink tanks.
34
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
Check the print job.
Check the print job.
Check the print job and the printing results.
Open the Ink Tank Cover and replace the Ink Tank for
which the Ink Lamp is flashing.
(→ , Replacing Ink Tanks)
Replace the Ink Tank that is low with a new Ink Tank .
(→ , Replacing Ink Tanks)
Prepare a new Ink Tank .
We recommend replacing the Ink Tank with a new Ink
Tank at this point if you plan to print large-format or
high-quantity jobs.
Close the Ink Tank Cover .
Open the Ink Tank Cover and replace the Ink Tank for
which the Ink Lamp is flashing.
(→ , Replacing Ink Tanks)
Load or reload the Ink Tank .
(→ , Replacing Ink Tanks)
Replace it with a new Ink Tank .
(→ , Replacing Ink Tanks)
Load an Ink Tank specified for use with the printer.
(→ , Replacing Ink Tanks)
The refill ink tank can no longer be used. See the
section " Ink level detection " and take the appropriate
action.
(→"Ink level detection," User Manual)