Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual page 40

Error Messages
Error Message
Parts replacement time has
passed.
Blue platen switch is dirty.
No printhead
Printhead error
Wrong printhead.
Problem with Printhead
PHead needs cleaning.
Execute printhead cleaning.
Cause
It is past the recommended time
to replace consumables for which
service is required.
The blue Switch on the platen is
dirty.
No Printhead is installed.
There is a problem with the
Printhead .
An incompatible Printhead has
been installed.
The Printhead nozzles are
becoming clogged.
The Printhead nozzles are
clogged.
The Printhead nozzles are
clogged.
40
Corrective Action
Contact your Canon dealer for assistance.
Open the Top Cover and clean the blue Switch on
the platen.
(→ , If Paper is Soiled)
Install the Printhead .
(→ , Replacing the Printhead )
Open the Top Cover and replace the Printhead with a
new one.
(→ , Replacing the Printhead )
Open the Top Cover and replace the Printhead with a
new one.
(→ , Replacing the Printhead )
If printing is faint, clean the Printhead .
(→ , If Printing is Faint)
Press the Online button to resume printing.
Follow these steps to clean the Printhead .
1. Hold down the Stop button for a second or more to
cancel printing.
2. Clean the Printhead .
(→ , If Printing is Faint)
If the message is still displayed after you execute
Head Cleaning B two or three times, contact your
Canon dealer for assistance.
Follow these steps to clean the Printhead .
1. Hold down the Stop button for a second or more to
cancel printing.
2. Clean the Printhead .
(→ , If Printing is Faint)
If this message is still displayed, replace the
Printhead .
(→ , Replacing the Printhead)