Error Message
Borderless printng not possible.
Check supported paper.
Before borderless printing,
move the blue platen switch.
Prepare for parts replacement.
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is not
compatible with borderless
printing.
The blue Switch on the platen was
set to the side opposite ● when a
borderless print job was received.
It is almost time to replace
consumables for which service is
required.
39
Corrective Action
Follow these steps to change the settings of the print
job to enable borderless printing.
1.
Hold down the Stop button for a second or more to
cancel printing.
2.
Make sure the correct printer driver for the printer is
selected and try printing again.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide .
(→"Types of Paper," User Manual)
If you press the Online button and continue printing,
the document will be printed with a border.
Hold down the Stop button for a second or more to
cancel printing.
If you press the Online button and continue printing,
the document will be printed with a border.
Before borderless printing, set the blue Switch on the
platen to the ● side.
(→"Setting the Blue Switch on the Platen," User
Manual)
You can continue to use the printer for some time
until Parts replacement time has passed. will be
displayed.
Contact your Canon dealer for assistance.
Error Messages