Printing Does Not Start - Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual

Printing Does Not Start

Phenomenon
The Data lamp on the Control
Panel does not light up
The printer does not respond even
if print jobs are sent
Ink Filling.. is displayed
The display screen indicates
Agitating
Cause
The printer is not on.
The target printer was not selected
when printing. (The printer is in
Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)
The printer is offline.
You have selected Save in mail
box in Output Method on the
printer.
The printer was forced off during
operation.
Ink agitation is in progress.
Corrective Action
Make sure the power cord is securely plugged in, all
the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select
Printer or Printer in the printing dialog box and try
printing again.
In Mac OS X, open the dialog box of the printer driver,
select the printer from the list of Printer , and try
printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or
Printers ) window.
2. Clear Pause Printing in the File menu to restart the
print job.
In Mac OS X, restart the print job as follows.
1. Open the Printer Setup Utility (or the Print
Center ).
2. Select the printer, and then Resume Printer (or
Start Jobs ) in the Printers menu to restart the print
job.
Press the Online button on the Control Panel to
bring the printer online.
Print the job saved on the printer's hard disk.
(→"Printing Saved Jobs," User Manual)
Wait until the system has been filled with ink. This
process may take about ten minutes.
The time for agitation varies depending on how long
the printer has been turned off. (Between about a
minute and a half to twenty minutes.) During agitation,
you can print or do other operations after the printer
goes Online .
3
Troubleshooting