Fax Problems; Sending Problems - Canon imageCLASS MF4270 Reference Manual

Before Using the
Machine 1

Fax Problems

Document and Paper
2
Copying
3
Sending and
Cannot send a fax.
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Sending Problems

■
Q Did you just turn on the main power switch?
A Wait for a while. After turning on the main power
switch, the machine cannot scan documents
immediately.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct telephone
line type. (See "Before FAX Setting, " in the Starter
Guide.)
Q Is your machine in the fax mode?
A Press [FAX] to show the fax standby display.
Back Previous
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
"Loading Documents, " on p. 2-4.)
A Make sure the scanning platform and rear cover are
fully closed. (See "Paper Jams, " on p. 10-6.)
Q Is the one-touch speed dialing key or coded speed
dialing code you entered registered correctly?
A Check that the Address Book settings are registered
correctly. (See "Storing/Editing Address Book, " on
p. 4-6.)
Q Did you dial the correct number?
A Check that you have the correct number.
TOP
Next
10-27