Additional Network Settings; Tcp/Ip Settings - Canon imageCLASS MF4270 Reference Manual

Before Using the
Machine 1

Additional Network Settings

Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Depending on your network environment, additional network
settings may be required.
It is recommended that the network administrator perform the following
procedures.

TCP/IP Settings

■
HTTP Settings
You can select whether or not to use HTTP for Remote UI.
The default setting is <ON>.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
Back Previous
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <USE HTTP>, then
press [OK].
6.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses the Remote UI.
<OFF>: Does not use the Remote UI.
7.
Press [Stop/Reset] to return to the standby
mode.
8.
Restart the machine.
TOP
Next
6-15