Canon imageCLASS MF4270 Reference Manual page 197

Before Using the
Machine 1
PAPER JAM
Document and Paper
Description
2
Copying
3
Action
Sending and
Receiving 4
Printing and
PAPER JAM
Scanning
5
OPEN REAR COVER
Description
Network
6
Remote UI
Action
7
System Manager
Settings
8
PLEASE WAIT
Maintenance
Description
9
Troubleshooting
10
Action
Appendix
11
Table of Contents
Index
Paper jams have occurred in the machine.
<LIFT PANEL TO OPEN/OPEN TONER COVER>
appears alternately.
Clear the paper jam (See "Paper Jams," on
p. 10-6.) and reload paper in the paper cassette
or multi-purpose tray. The cover must be opened
and closed to resume the current job.
Paper jams have occurred in the machine.
<LIFT PANEL TO OPEN/OPEN TONER COVER>
appears alternately.
Clear the paper jam (See "Paper Jams," on
p. 10-6.) and reload paper in the paper cassette
or multi-purpose tray. The cover must be opened
and closed to resume the current job.
This message appears when turning on the main
power switch, or when the machine is not ready
for printing.
Wait until the message disappears.
Back
REMOVE MP PAPER
Description Paper is loaded in the multi-purpose tray.
Action Remove the paper from the multi-purpose tray.
The machine will not print faxes, reports, or lists
when paper is loaded in the multi-purpose tray.
They will be stored in memory.
SET PAPER AGAIN
SET TONER AGAIN
Description Paper is not loaded properly, or the toner
cartridge is not set.
Action Load paper properly. (For instructions on how to
load paper in the paper cassette, see "Set Up the
Machine" in the Starter Guide and to load paper
in the multi-purpose tray, see "Loading Paper,"
on p. 2-10.)
Set the toner cartridge in the machine (see "Set
Up the Machine" in the Starter Guide).
SYSTEM ERROR
EXXX
Description A system error has occurred. <XXX> will be a
three-digit code that indicates a particular type
of error.
Action Turn off the main power switch, wait for more
than 5 seconds, then turn it on again. If the
message persists, turn off the main power switch,
disconnect the power cord, and contact Canon
Customer Care Center.
TOP
Previous Next
10-18