Canon imageCLASS MF4270 Reference Manual page 220

Before Using the
Machine 1
Paper jams occur.
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
Printout is skewed.
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
A Make sure the scanning platform and rear cover are
fully closed. (See "Paper Jams, " on p. 10-6.)
Q Is the paper loaded correctly?
A Make sure the paper is correctly loaded. (See "Set Up
the Machine, " in the Starter Guide.)
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-7.)
Q Is the paper loaded correctly?
A Make sure the paper is correctly loaded in the
machine. (See "Set Up the Machine, " in the Starter
Guide.)
A Make sure the Output tray is free of obstructions. (See
"Machine Components, " on p. 1-3.)
Back
Printout is not clear.
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-7.)
Q Are you printing on the wrong side of the paper?
A Some papers have a "right" side for printing. If the
printout quality is not as clear as you think it should
be, try printing on the other side of the paper
Cannot print two-sided documents
Q Is the printer driver settings correctly set for two-
sided printing?
A Make sure that the printer driver is correctly set. (See
Online Help.)
Cannot print documents from a computer.
Q Is the printer driver properly installed?
A Make sure that the printer driver is properly installed.
TOP
Previous Next
10-41