Canon imageCLASS MF4270 Reference Manual page 249

Before Using the
Machine 1
SYSTEM SETTINGS
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3. ETHERNET DRIVER
1. AUTO DETECT
AUTO
MANUAL
1. COMMUNICATN MODE
2. ETHERNET TYPE
2. MAC ADDRESS
4. VIEW IP ADDRESS
1. IP ADDRESS
2. SUBNET MASK
3. GATEWAY ADDRESS
5. STARTUP TIME SET.
Specifies the type of network connection.
Selects the detection method of Ethernet driver.
Sets the machine to determine the communication mode (Half duplex/Full duplex) and
Ethernet type (10Base-T/100Base-TX) automatically.
Sets the communication mode and Ethernet type manually.
Selects the communication mode.
– FULL DUPLEX
– HALF DUPLEX
Selects the Ethernet type.
– 100 BASE-TX
– 10 BASE-T
Displays the twelve-digit MAC address of the machine.
Checks the current network settings.
Checks the IP address.
Checks the subnet mask.
Checks the gateway address.
Sets the time period required to delay the startup of network communications for the machine
(0SEC–300SEC (60SEC)).
Back Previous Next
TOP
11-23