Canon imageCLASS MF4270 Reference Manual page 224

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Detailed information concerning the machine cannot be set or
Scanning
5
browsed using the Remote UI or utility.
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the computer that is printing properly set up?
A Make sure the proper printer driver is installed. (See
"Software Settings with Computer, " in the Starter
Guide.)
A Make sure the correct machine is set as the output
destination for the computer that is printing in
[Printers and Faxes] or [Printers].
Q Does the SNMP community name match?
A If you use an SNMP community name different from
the one stored in the machine to access the machine
from a utility, the utility will not detect the machine.
In this case, check the SNMP community name. (See
"SNMP" on p. 6-7.)
Back Previous Next
TOP
10-45