Canon imageCLASS MF4270 Reference Manual page 54

Before Using the
Machine 1
Setting Paper Size and Type
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The default setting is <LTR> and <PLAIN PAPER>. When you
place other sizes and/or types of paper, follow this procedure to
change the settings.
The procedure is same for the paper cassette and multi-
purpose tray except for selecting the paper cassette or multi-
purpose tray in step 3 and 6.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <PAPER SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <CASSETTE> or <MP
TRAY>, then press [OK].
4.
Press [ ] or [ ] to select <PAPER SIZE>, then
press [OK].
Back Previous
5.
Press [ ] or [ ] to select the paper size, then
press [OK].
You can select from the following paper sizes:
<LTR>, <LGL>, <A4>, <B5>, <A5>, <EXECUTIVE>, <COM10>,
<MONARCH>, <DL>, <ISO-C5>, <OFICIO>, <BRAZIL-OFICIO>,
<MEXICO-OFICIO>, <FOLIO>, <GOVERNMENT-LETTER>,
<GOVERNMENT-LEGAL>, <FOOLSCAP>
The available paper sizes will vary depending on the country where
the unit was purchased.
6.
Press [ ] or [ ] to select <CASSETTE> or <MP
TRAY>, then press [OK].
7.
Press [ ] or [ ] to select <PAPER TYPE>, then
press [OK].
If you have selected <B5>, <A5>, <EXECUTIVE>, <COM10>,
<MONARCH>, <DL> or <ISO-C5> for the paper size in step 5, <PAPER
TYPE> is not displayed. Skip to step 9.
TOP
Next
2-13